True/False Indicate whether the
statement is true or false.
|
|
1.
|
Use of wrong tools or defective tools or improperly using tools are all factors
that could lead to an accident.
|
|
2.
|
Machines with moving or rotating parts are commons sources of accidents.
|
|
3.
|
Its okay to fool around on the job.
|
|
4.
|
It’s recommended to use thin extension cords for safety purposes.
|
|
5.
|
Always operate equipment that you do not understand, that is the best way to
maser it.
|
Completion Complete each
statement.
|
|
6.
|
Safety should be the number ____ concern in the workplace.
|
|
7.
|
An __________ is an unexpected action that results in injury to people or damage
to porperty.
|
|
8.
|
Accidents can be ____________.
|
|
9.
|
Place guards and interlocks on machines to prevent ______ from moving parts and
electrical shock.
|
|
10.
|
Employees in a noisy environment should wear ___ protection.
|
|
11.
|
Lockout is the placement of a lockout device on an energy-isolating device in
accordance with an established procedure to ensure that the equipment being controlled cannot be
_________ until the lockout device is removed.
|
|
12.
|
Machinery or equipment is considered to be __________ if it is connect to an
energy source or contains residual or stored energy.
|
|
13.
|
Hot tap procedures are commonly used to replace or add sections of ___________
without the interruption of service for air, gas, water, steam, and petrochemical distribution
systems.
|
|
14.
|
An energy-siolating device is a mechanical device that physically prevents the
__________ or release of energy.
|
|
15.
|
An energy-isolating device is capable of being locked out if it has a ______ or
other means of attachment to which, or through which, a lock can be affixed or a locking mechanism
built into it.
|
|
16.
|
If a device is incapable of being locked out, the employer’s energy
control program shall utilize a _________ system.
|
|
17.
|
A tagout device must warn against _________ conditions if the machine or
equipment is energized and must include a clear warning.
|
|
18.
|
Lockout and tagout devices must be singularly identified, the only device(s)
used for _________ energy, and not used for other purposes.
|
|
19.
|
Lockout and tagout devices must be standardized within the facility in at least
one of the following criteria: color, ______, or size.
|
|
20.
|
Each lockout or tagout device must be removed from each energy-isolating device
by the ___________ who applied it.
|
|
21.
|
When a group of people perform service and/or maintenance, each person must use
a procedure that protects him or her to the same degree that a personal _______ or tagout procedure
would.
|
|
22.
|
After all tools have been removed from the machine or equipment, guards have
benn reinstalled, and employees are in the clear, remove all _________ or tagout devices.
|
|
23.
|
Notify affected employees that the service or maintenance is completed and the
__________ or equipment is ready for use.
|