Name:     ID: 
 
Email: 

ENGR3520HomeworkChapter13

Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 1. 

A parallel-in, serial-out shift register is loaded initially with 1100. What will the register contain after two clock pulses if the serial input is LOW?
a.
0000
c.
0001
b.
1110
d.
0011
 

 2. 

A parallel-in, serial-out shift register is loaded initially with 1010. What will the register contain after two clock pulses if the serial input is LOW?
a.
0001
c.
0011
b.
1110
d.
0010
 

 3. 

A parallel-in, serial out shift register is loaded initially with 1010. What will the register contain after three clock pulses if the serial input is LOW?
a.
0000
c.
0011
b.
0001
d.
1110
 

 4. 

Which abbreviation describes the shift register used for serial-to-parallel conversion?
a.
SIPO
c.
PISO
b.
SISO
d.
PIPO
 

 5. 

Which abbreviation describes a shift register that has no parallel inputs or outputs?
a.
PISO
c.
SISO
b.
PIPO
d.
SIPO
 

 6. 

What is the modulus of a 4-bit Johnson counter?
a.
6
c.
8
b.
4
d.
16
 

 7. 

An important application of a Johnson counter is
a.
easy decoding of timing pulses.
c.
counting in binary.
b.
frequency division.
d.
counting in decimal.
 

 8. 

How many data inputs and outputs does an 8-bit SIPO shift register have?
a.
one input, eight outputs
c.
eight inputs, one output
b.
four inputs, four outputs
d.
eight inputs, eight outputs
 

 9. 

How many data inputs and outputs does an 8-bit PISO shift register have?
a.
four inputs, four outputs
c.
eight inputs, eight outputs
b.
eight inputs, one output
d.
one input, eight outputs
 

 10. 

What function is performed by a 74194 Universal Shift Register if the select inputs are S1 = 0 and S0 = 1?
a.
shift right
c.
parallel load
b.
shift left
d.
hold
 

 11. 

What function is performed by a 74194 Universal Shift Register if the select inputs are S1 = 1 and S0 = 1?
a.
shift right
c.
shift left
b.
hold
d.
parallel load
 

 12. 

In a microprocessor system, what does the term "data bus" mean?
a.
any connection between two ICs
b.
a parallel set of conductors that is shared by several devices
c.
any two-way data path
d.
any parallel connection between registers that consists of eight or more lines
 



 
         Start Over