True/False Indicate whether the
statement is true or false.
|
|
1.
|
As more electronic systems have been designed using digital technology, devices
have become smaller and less powerful.
|
|
2.
|
A digital audio system makes a copy of the waveform.
|
|
3.
|
A digital audio system stores a code, a series of amplitude numbers, that tells
the compact disc player how to re-create the original sound every time a disc is played.
|
|
4.
|
The binary number system is a positional notation system.
|
|
5.
|
Hexadecimal numbers are primarily used as a shorthand form of binary
notation.
|
Multiple Choice Identify the
choice that best completes the statement or answers the question.
|
|
6.
|
Typically, _____ vary between two discrete values in much the same way that a
light switch has two levels, “off” and “on.”
a. | analog signals | c. | digital signals | b. | continuous voltages | d. | frequency
modulations |
|
|
7.
|
The signal on a CD is sampled _____ times each second.
a. | 4,100 | c. | 100,400 | b. | 44,100 | d. | 104,100 |
|
|
8.
|
Assigning the digit 1 to a logic HIGH and digit 0 to logic LOW is called
_____..
a. | negative logic | c. | positional notation | b. | positive logic | d. | amplification |
|
|
9.
|
The hexadecimal number system is based on powers of _____.
|
|
10.
|
A momentary variation of voltage from one logic level to the opposite level and
back again is called _____.
a. | pulse width | c. | amplitude | b. | aperiodic waveform | d. | pulse |
|
|
11.
|
The rightmost bit of a binary number is the:
a. | rising edge | c. | rising and falling edge | b. | least significant
bit | d. | most significant
bit |
|
|
12.
|
Which of the following terms does NOT apply to digital signals?
a. | Continuously variable | c. | Numbers | b. | Discrete steps | d. | Microprocessors |
|
|
13.
|
A _____ system is a system of writing numbers where the value of a digit depends
not only on the digit, but also on its placement within a number.
a. | positional notation | c. | trailing edge | b. | decimal number | d. | frequency |
|
|
14.
|
After the binary system, ______ numbers are the most often used in digital
applications.
a. | decimal | c. | hexadecimal | b. | digital logic | d. | digital |
|
|
15.
|
______ is the fraction of the total period that a digital waveform is
in the HIGH state.
a. | Frequency | c. | Time HIGH | b. | Duty cycle | d. | Time LOW |
|
|
16.
|
______ is a time-varying sequence of logic HIGHs and LOWs that repeats over a
specified period of time.
a. | Time LOW | c. | Aperiodic waveform | b. | Time HIGH | d. | Periodic
waveform |
|
|
17.
|
A special case of a symmetrical periodic waveform is a:
a. | duty cycle | c. | clock signal | b. | pulse width | d. | digital
waveform |
|
|
18.
|
______ is a system in which logic LOW represents binary digit 1 and logic HIGH
represents binary digit 0.
a. | Logic level | c. | Negative logic | b. | Positive logic | d. | Digital logic |
|
|
19.
|
A truth table is a list of output levels of a circuit corresponding to all
different:
a. | input combinations | c. | timing diagrams | b. | input digital circuits | d. | frequencies |
|
|
20.
|
For the binary numbers from 0000 to 1111, the decimal equivalents are
_____.
a. | 0 to 10 | c. | 1 to 15 | b. | 0 to 15 | d. | 1 to 10 |
|